Pneumatic Logic - subbase mount

Printer Friendly Page
Skip to Technical Details
Skip to Description
Skip to Prices

Description

Logic elements

A range of logic elements suitable for mounting on 3 port subbase.

The subbases have 4mm push in fittings, a clip for DIN rail mounting and are availble in two versions - "Cascade" or "Common" - see previous section for description.
Subbases can be used standalone or joined together in an assembly.

An input module (optional) can be used at the start of a block.

Approximate switching pressures (80 psi supply):
NOT (standard) 50psi on rising, 15psi on falling
NOT (threshold) 60psi on rising, 1/12 supply on falling
YES 40psi on rising, 20psi on falling

Memory

The purpose of the memory relay is to maintain an output after the set signal has been removed.

Available with and without a manual override the memory relay must be used with the 4 port subbase.

Time delay relays can also be built into this system (see next section).

Technical Details

Temperature:	-15 to +60 deg C
Pressure:	3 - 8 bar
Flow:	General Qmax = 180Nl/min

Prices (Click quantity for more availability info)

		Order Code	Available	Each
Logic Elements
	AND	117578	0	£43.91
	OR	117579	0	£39.55
	NOT (standard)	117580	1	£76.44
	NOT (threshold)	117581	0	£76.44
	YES	117582	5	£82.29
	Input	117586	2	£46.53
Memory
	Standard	117594	0	£96.48
	Without manual override	117595	1	£100.24
Subbases
	3 port common	117583	2	£48.21
	3 port cascade	117584	2	£50.95
	4 port	117585	1	£75.77

(All Prices Exclude VAT)

You are here - All Product > Air Valves > Pneumatic Logic & 2 hand start

Pneumatic Logic - subbase mount